GW Instek PEL-2000 Series User Manual - Manual (Page 29)

GETTING STARTED
29
Display Key Used to alternate the display
output on the load module.
Current
Voltage
Power
Load time
Load Key
LOAD
Activates the load for the active
channel. (Right or Left)(A or B)
Left Voltage
Sense The voltage sense terminals are
used when precise measurement is
needed. V Sense terminals are used
to compensate for voltage drops
across the main terminals caused
by the resistance of the load wires.
It is automatically activated when
connected to a DUT.
Right Voltage
Sense
Positive and
Negative
Terminals Left The terminals for both the left and
right side of a load can draw
differing amounts depending on
the load module specifications.