GW Instek PEL-2000 Series User Manual - Manual (Page 79)

GETTING STARTED
79
Configurations Description
There are a number of different configurations for the PEL series
including protection modes, operating configurations, and file
system configurations. The Configuration Description section
describes what the different configurations are used for and how
they can be relevant to different operations.
Protection Modes
Background The PEL 2000 series include a number of protection
modes: Over Current Protection, Over Voltage
Protection and Over Power Protection.
The protection modes are useful to protect both the
load modules and the DUT(s). A buzzer can be set
to notify when a protection setting has been
tripped. When a protection feature is activated and
has been tripped then the load unit will display an
alarm. The Mainframe will also display an alarm.
When an alarm has been tripped the load will stop
sinking current/voltage. There are three Over load
protection settings: ON, OFF and Clear.
03/02/09
10 : 30
CC
Dyna
High
Configure
Previous
Menu
Protection Go-NoGo
CH1
Other
Alarm
Conf