GW Instek PEL-2000 Series User Manual - Manual (Page 140)

PEL-2000 Series User Manual
140
3. Press the selector knob to edit
PROG:, then turn to select the
program number.
OR
Use the number pad to enter a
program number.
Program: 01 ~12
4. Press Enter or push the selector
knob to confirm.
5. Repeat steps 2-4 to choose the
sequence number (SEQ:).
Sequence: 01 ~ 10
As sequences are executed sequentially, start at SEQ:
01.
03/02/09
10 : 30
Configure Chain Save
Recall
Default
Active
Channel
6. Repeat steps 2-4 to configure the
following for the current
Program Sequence:
Memory: M001 ~M120