GW Instek PEL-2000 Series User Manual - Manual (Page 105)

TUTORIALS
105
4. Run Run the loads. To run the loads,
press the LOAD key on the master
mainframe. To stop, press again.
When the LOAD key is pressed all
loads will be active.
Options
5. Load Preset
memory
Load preset memory on the
mainframe and all frame-linked
slaves. Page 230
6. Load Setup
Memory
Load setup memory on the
mainframe and all frame-linked
slaves Page 229
7. Set slave to
indepen-
dent
Press shift + CHAN on the slave
unit to enable local control on a
slave unit.
Note
When a load is run or memory is recalled from the
master mainframe, the slave unit will return to
mainframe control.