GW Instek PEL-2000 Series User Manual - Manual (Page 39)

GETTING STARTED
39
Rack Mount Installation
Background The PEL-2004 can be used in a standard 19” rack
mount enclosure with the optional rack mount kit
(GW Instek part no. 11EL-20040201). Each unit
requires a rack height of 4U with a 1U space for
ventilation top and bottom. The rear of the rack
mount enclosure must be free of obstruction to
allow heat to dissipate from the mainframe(s).
Steps 1. Screw the rack mount brackets as shown below
using the supplied bolts.
PEL-2004
2. Insert into a standard 19” rack enclosure with
at least 1U of space top and bottom for
ventilation.