GW Instek PEL-2000 Series User Manual - Manual (Page 154)

PEL-2000 Series User Manual
154
03/02/09
10 : 30
CC
Static
High
Configure
Previous
Menu
CH1
s_loop
2. Use the Selector knob to
highlight Repeat.
3. Press the Selector knob to edit
Repeat, then turn to increase or
decrease the value.
OR
4. Use the number pad to enter a
number.
5. Press the Selector knob or Enter
to confirm selection.
OR ENTER
6. Repeat for the remaining
parameters.
Save Loop 7. Press Save (F3) to save the loop.