GW Instek PEL-2000 Series User Manual - Manual (Page 136)

PEL-2000 Series User Manual
136
03/02/09
10 : 30
CV
Static
High
Configure Configure
Mode
CV
CH1
Slow
Response
Slow
Main
2. Press the Selector knob to edit
the selected value, then turn to
increase or decrease the value.
OR
Use the number pad to enter a
number.
3. Press the selector knob or Enter
to confirm selection.
4. Repeat steps 1-3 for the
remaining parameters.
Note
When setting the current limit, please ensure that the
current limit is within the test device’s limits.