GW Instek PEL-2000 Series User Manual - Manual (Page 216)

PEL-2000 Series User Manual
216
Saving/Recalling Memory Data to USB
Background There are two options to save or recall Memory
data to a USB flash drive:
Save Chan Current: Saves the active Channel’s
Memory data(M001~M120) into the default file
path (20XXX_XX.M).
Save Chan All: Every channel’s Memory data
(CH1 M001~120 ~ CH8 M001~M120) will be saved
into a directory (ALL00XX) as separate files for
each channel (P0X0X_C1.M ~ P0X0X_C8.M).
Recall File: Recalls the selected file to the active
channel’s Memory (MXXX). It is not possible to
update all the channels at once, only one channel at
a time can be recalled.
The file extension *.M is used for Memory data
only.
For more information about the file structures see
page 89.
Parameters Save All Ch Directory ALL0000 ~ ALL0099
File: P0X0X_CX.M
Save File File: 20XXX_XX.M
Update File File: 20XXX_XX.M
Panel operation 1. Insert a USB flash drive into the
front panel USB slot.
2. Ensure the USB path has been
set.
Page 208.