GW Instek AFG-2225 User Manual - Manual (Page 90)

AFG-2225 Series User Manual
90
FSK Source
The AFG-2225 accepts internal and external FSK sources, with
internal as the default source. When the FSK source is set to internal,
the FSK rate is configured using the FSK Rate function. When an
external source is selected the FSK rate is equal to the frequency of
the Trigger INPUT signal on the rear panel.
Panel Operation 1. Press the MOD key.

2. Press F3 (FSK).
K 
3. Press F1 (Source).
our 
4. Press F1 (Internal) or F2
(External) to select the FSK
source.


~


5. Press Return to return to the
previous menu.
Return
Note Note that the Trigger INPUT terminal cannot
configure edge polarity.