GW Instek AFG-2225 User Manual - Manual (Page 76)

AFG-2225 Series User Manual
76
Selecting Frequency Modulation (FM)
When FM is selected, the modulated waveform depends on the
carrier frequency, the output amplitude and offset voltage.
Panel Operation 1. Press the MOD key.

2. Press F2 (FM).
 
FMCarrier Shape
Background The default waveform shape is set to sine. Noise
and pulse waveforms cannot be used as a carrier
wave.
Panel Operation 1. Press the Waveform key.

2. Press F1~F4 to select the
carrier shape.
n

~
amp

Range Carrier Shape Sine, Square, Ramp.