GW Instek AFG-2225 User Manual - Manual (Page 111)

MODULATION
111
Center Frequency and Span
A center frequency and span can be set to determine the upper and
lower sweep limits (start/stop).
Panel Operation 1. Press the SWEEP key.

2. Press F5 (More).
or 
3. Press F2 (Span) or F3 (Center)
to select the span or center.
pan

~
ntr

4. The Span or Center parameters will become
hightlighted in the waveform display area.
Span
Center
5. Use the arrow keys and scroll
wheel or number pad to enter
the Span/Center frequency.
 /
  

 



6. Press F1~F5 to select the
Start/Stop frequency units.
uz

~
z
