GW Instek AFG-2225 User Manual - Manual (Page 144)

AFG-2225 Series User Manual
144
3. Select F1 (50 OHM) or F2
(High Z) to select the output
impedance.


~
h

Selecting the Output Phase
Panel operation 1. Press the CH1/CH2 key.

Note The phase function can only be used if the ARB,
MOD, SWEEP or BURST functions are not active.
2. Press F4 (Phase) and then
press F1 (Phase)
has 
has 
3. The Phase parameter in the parameter window
will become hightlighed.