GW Instek AFG-2225 User Manual - Manual (Page 207)

REMOTE INTERFACE
207
Sine Square Ramp Pulse Noise ARB
AM
     
FM
     
PM
     
FSK
     
SUM
     
SWEEP   
  
BURST   
  
Syntax SOURce[1|2]:FUNCtion {SINusoid|SQUare|RAMP|
PULSe|NOISe| USER}
Example SOUR1:FUNC SIN
Sets the output as a sine function.
Query Syntax SOURce[1|2]:FUNCtion?
Return Parameter SIN, SQU, RAMP, PULS,
NOIS, USER
Returns the current output
type.
Example SOUR1:FUNC?
SIN
Current output is sine.
SOURce[1|2]:FREQuency
Source Specific
Command
Description The SOURce[1|2]:FREQuency command sets the
output freuquency for the selected channel. The
query command returns the current frequency
setting.
Note The maximum and minimum frequency depends
on the function mode.
Sine, Square 1μHz~25MHz
Ramp
1μHz~1MHz
Pulse
500μHz~25MHz