GW Instek AFG-2225 User Manual - Manual (Page 281)

REMOTE INTERFACE
281
-222 Data out of range;frequency; value clipped to ...
Example: If the frequency was set to a value out of
range, it is automatically set to an upper or lower
limit.
-222 Data out of range;user frequency; value clipped to upper limit
Example: If the frequency is set to a value out of
range for an arbitrary waveform using,
SOURce[1|2]: APPL: USER or SOURce[1|2]:
FUNC:USER, it is automatically set to the upper
limit.
-222 Data out of range;ramp frequency; value clipped to upper limit
Example: If the frequency is set to a value out of
range for a ramp waveform using, SOURce[1|2]:
APPL: RAMP or SOURce[1|2]:FUNC:RAMP, it is
automatically set to the upper limit.
-222 Data out of range;pulse frequency; value clipped to upper limit
Example: If the frequency is set to a value out of
range for a pulse waveform using, SOURce[1|2]:
APPL:PULS or SOURce[1|2]:FUNC:PULS, it is
automatically set to the upper limit.
-222 Data out of range;burst period; value clipped to ...
Example: If the burst period was set to a value out of
range, it is automatically set to an upper or lower
limit.
222 Data out of range;burst count; value clipped to ...
Example: If the burst count was set to a value out of
range, it is automatically set to an upper or lower
limit.