GW Instek AFG-2225 User Manual - Manual (Page 85)

MODULATION
85
Selecting FSK Modulation
When using FSK mode, the output waveform uses the default
settings for carrier frequency, amplitude and offset voltage.
Panel Operation 1. Press the MOD key.

2. Press F3 (FSK).
K 
FSK Carrier Shape
Background The default waveform shape is set to sine. Noise
waveforms cannot be used as carrier waves.
Panel Operation 1. Press the Waveform key.

2. Press F1~F4 to choose the
carrier wave shape.
n

~
amp

Range Carrier Shape Sine, Square, Pulse, Ramp