GW Instek AFG-2225 User Manual - Manual (Page 264)

AFG-2225 Series User Manual
264
Value data: ± 511
Example SOUR1:ARB:EDIT:POIN 1000, 511
Creates a point on the arbitrary waveform at
address 1000 with the highest amplitude.
SOURce[1|2]:ARB:EDIT:LINE
Source Specific
Command
Description Edit a line on the arbitrary waveform. The line is
created with a starting address and data point and
a finishing address and data point.
Note A waveform/waveform segment cannot be
deleted when output.
Syntax SOURce[1|2]:ARB:EDIT:LINE
[[,[,[,]]]]
Parameter Address of data point1:
0~4095
Value data2: ± 511
Address of data point2:
0~4095
Value data2: ± 511
Example SOUR1:ARB:EDIT:LINE 40, 50, 100, 50
Creates a line on the arbitrary waveform at 40,50 to
100,50.
SOURce[1|2]:ARB:EDIT:PROTect
Source Specific
Command
Description Protects a segment of the arbitrary waveform from
deletion or editing.
Syntax SOURce[1|2]:ARB:EDIT:PROTect
[[,]
Parameter Start address: 0~4095
1 ~ 4096
Example SOUR1:ARB:EDIT:PROT 40, 50