GW Instek AFG-2225 User Manual - Manual (Page 271)

REMOTE INTERFACE
271
Save and Recall Commands
Up to 10 different instrument states can be stored to non-volatile
memory (memory locations 0~9).
*SAV
Instrument
Command
Description Saves the current instrument state to a specified
save slot. When a state is saved, all the current
instrument settings, functions and waveforms are
also saved.
Note The *SAV command doesn’t save waveforms in
non-volatile memory, only the instrument state.
The *RST command will not delete saved
instrument states from memory.
Syntax *SAV {0|1|2|3|4|5|6|7|8|9}
Example *SAV 0
Save the instrument state to memory location 0.
*RCL
Instrument
Command
Description Recall previously saved instrument states from
memory locations 0~9.
Syntax *RCL {0|1|2|3|4|5|6|7|8|9}
Example *RCL 0
Recall instrument state from memory location 0.
MEMory:STATe:DELete
Instrument
Command
Description Delete memory from a specified memory location.
Syntax MEMory:STATe:DELete {0|1|2|3|4|5|6|7|8|9}
Example MEM:STAT:DEL 0