GW Instek AFG-2225 User Manual - Manual (Page 268)

AFG-2225 Series User Manual
268
SOURce[1|2]:PHASe:SYNChronize
Instrument
Command
Description Sychronizes the phase of channel 1 and channel 2.
SOURce1 or SOURce2 has not effect on this
command.
Syntax SOURce[1|2]:PHASe:SYNChronize
Example SOURce1:PHASe:SYNChronize
Synchronizes the phase of channel 1 and channel 2.
COUPLE
The Couple commands can be used to remotely set the frequency
coupling and amplitude coupling.
SOURce[1|2]:FREQuency:COUPle:MODE
Instrument
Command
Description Set the frequency coupling mode.
Syntax SOURce[1|2]:FREQuency:COUPle:MODE
{Off|Offset|Ratio}
Example SOURce1:FREQuency:COUPle:MODE Offset
Sets the frequency coupling mode to offset.
Query Syntax SOURce[1|2]:FREQuency:COUPle:MODE？
Return Parameter Off Disables frequency coupling.
Offset Set frequency coupling to offset mode.
Ratio Sets frequency coupling to ratio mode.
Example SOURce1:FREQuency:COUPle:MODE？
Off
Frequency coupling is turned off.