GW Instek AFG-2225 User Manual - Manual (Page 221)

REMOTE INTERFACE
221
SOURce[1|2]:AM:INTernal:FREQuency
Source Specific
Command
Description Sets the frequency of the internal modulating
waveform only. The default frequency is 100Hz.
Syntax SOURce[1|2]:AM:INTernal:FREQuency
{|MINimum|MAXimum}
Parameter 2 mHz~ 20 kHz
Example SOUR1:AM:INT:FREQ +1.0000E+02
Sets the modulating frequency to 100Hz.
Query Syntax SOURce[1|2]:AM:INTernal:FREQuency?
[MINimum|MAXimum]
Return Parameter Returns the frequency in
Hz.
Example SOUR1:AM:INT:FREQ? MIN
+1.0000E+02
Returns the minimum frequency allowed.
SOURce[1|2]:AM:DEPTh
Source Specific
Command
Description Sets or queries the modulation depth for internal
sources only. The default is 100%.
Note The function generator will not output more than
±5V, regardless of the modulation depth.
The modulation depth of an external source is
controlled using the ±5V MOD INPUT terminal on
the rear panel, and not the
SOURce[1|2]:AM:DEPTh command.
Syntax SOURce[1|2]:AM:DEPTh {
|MINimum|MAXimum}
Parameter 0~120%
Example SOUR1:AM:DEPT 50
Sets the modulation depth to 50%.