GW Instek AFG-2225 User Manual - Manual (Page 141)

SECONDARY SYSTEM FUNCTION SETTINGS
141
1. The method for outputting a square wave has
been previously described. Use this method to
output a 2kHz squarewave from CH1 with an
amplitude of 5Vpp and a DC offset of 1Vdc.
2. Press UTIL, F4 (Dual
Chan) to enter the
coupling function.
 ualhan
3. Press F3 (Tracking),
F2 (On) to turn on the
tracking function.
rakn n
4. When tracking is turned on, parameters such as
amplitude and frequency from the current
channel are mirrored on the other channel.