GW Instek AFG-2225 User Manual - Manual (Page 243)

REMOTE INTERFACE
243
Parameter 1μHz~ 25MHz
1μHz~ 15MHz(Square)
1μHz~ 1MHz (Ramp)
Example SOUR1:FREQ:STOP +2.0000E+03
Sets the stop frequency to 2kHz.
Query Syntax SOURce[1|2]:FREQuency:STOP? [MINimum|
MAXimum]
Return Parameter Returns the stop frequency
in Hz.
Example SOUR1:FREQ:STOP? MAX
+8.0000E+00
Returns the maximum stop frequency allowed.
SOURce[1|2]:FREQuency:CENTer
Source Specific
Command
Description Sets and queries the center frequency of the sweep.
550 Hz is the default center frequency.
Note The maximum center frequency depends on the
sweep span and maximum frequency:
max center freq = max freq – span/2
Syntax SOURce[1|2]:FREQuency:CENTer
{|MINimum|MAXimum}
Parameter 450Hz~ 25MHz
450Hz~ 15MHz(Square)
450Hz~ 1MHz (Ramp)
Example SOUR1:FREQ:CENT +2.0000E+03
Sets the center frequency to 2kHz.
Query Syntax SOURce[1|2]:FREQuency:CENTer? [MINimum|
MAXimum]
Return Parameter Returns the stop frequency
in Hz.