GW Instek AFG-2225 User Manual - Manual (Page 252)

AFG-2225 Series User Manual
252
Example SOUR1:BURS:MODE?
TRIG
The current burst mode is triggered.
SOURce[1|2]:BURSt:NCYCles
Source Specific
Command
Description Sets or queries the number of cycles (burst count)
in triggered burst mode. The default number of
cycles is 1. The burst count is ignored in gated
mode.
Note If the trigger source is set to immediate, the
product of the burst period and waveform
frequency must be greater than the burst count:
Burst Period X Waveform frequency > burst count
If the burst count is too large, the burst period will
automatically be increased and a “Settings
conflict” error will be generated.
Only sine and square waves are allowed infinite
burst above 25 MHz.
Syntax SOURce[1|2]:BURSt:NCYCles{< # cycles>
|INFinity|MINimum |MAXimum}
Parameter <# cycles> 1~65535 cycles.
INFinity Sets the number to continuous.
MINimum Sets the number to minimum allowed.
MAXimum Sets the number to maximum allowed.
Example SOUR1:BURS:NCYCl INF
Sets the number of burst cycles to continuous
(infinite).
Query Syntax SOURce[1|2]:BURSt:NCYCles? [MINimum|MAXimum]
Return Parameter Returns the number of cycles.
INF INF is returned if the number of cycles
is continuous.