GW Instek AFG-2225 User Manual - Manual (Page 269)

REMOTE INTERFACE
269
SOURce[1|2]:FREQuency:COUPle:OFFSet
Instrument
Command
Description Sets the offset frequency when the frequency
coupling mode is set to offset.
Syntax SOURce[1|2]:FREQuency:COUPle:OFFSet {frequency}
Example SOURce1:FREQuency:COUPle:OFFSet 2khz
Sets the offset frequency to 2kHz (the frequency of
CH2 minus CH1 is 2kHz).
Syntax SOURce[1|2]:FREQuency:COUPle:OFFSet?
Example SOURce1:FREQuency:COUPle:OFFSet?
+2.0000E+03
The offset of channel 2 from channel 1 is 2kHz.
SOURce[1|2]:FREQuency:COUPle:RATio
Instrument
Command
Description Sets the frequency coupling ratio when frequency
coupling is set to ratio mode.
Syntax SOURce[1|2]:FREQuency:COUPle:RATio {ratio}
Example SOURce1:FREQuency:COUPle:RATio 2
Set the CH2 to CH1 frequency ratio to 2.
Query Syntax SOURce[1|2]:FREQuency:COUPle:RATio?
Example SOURce1:FREQuency:COUPle:RATio?
+2.0000E+00
Returns the CH2 to CH1 frequency ratio as 2.
SOURce[1|2]:AMPlitude:COUPle:STATe
Instrument
Command
Description Enables or disables the amplitude coupling.
Syntax SOURce[1|2]:AMPlitude:COUPle:STATe
{ON|Off}