IAI America RCS3PCR-SS8C - Manual (Page 92)

11. Maintenance and Inspection
82
[Cleanroom specification RCS3(P) CR-SA8C]
How to inspect the interior:
1) Use an Allen wench of 2 mm across flats to remove the two screws and turn up the stainless sheet.
Make a visual check of the interior to see if there is any dust or foreign matter in the unit and
check the lubrication. Even if the grease you see around the parts is brown, the lubrication is
fine as long as the traveling surface appears shiny.
2) If the grease becomes dirty and dull or if the grease has worn away due to extended operating time, lubricate
the parts after cleaning them.
Stainless-sheet retainer cover mounting bolt