IAI America RCS3PCR-SS8C - Manual (Page 191)

11. Maintenance and Inspection
171
* Set the sound-wave tension gauge according to the operation manual for the applicable gauge.
Setting items:
Belt unit mass = 1.8 [g/mm]
Belt width = 15 [mm]
Span = 74 [mm]
Tension: 55 to 60 [N]
[5] Securely tighten the motor unit bolts.
Tightening torque: 176 N�cm (18 kgf�cm)
[6] Pull out the tension bolt and put the original screw back in to plug the hole.
6)-2 Pull method
[1] Pass a long tie-band (thin string) over the motor unit and pull it with the tension gauge by applying the
specified load.
* Pulling load: 114 � 5 [N]
[2] Securely tighten the motor unit bolts.
Tightening torque: 176 N�cm (18 kgf�cm)
7) Secure the pulley cover in place. The motor has been replaced.