Luminex 100 IS User Manual, Version 2.1 - Manual (Page 72)

100 IS S Users Manual Version 2.1 x MAP Technology
7 - 12 PN 89-00002-00-061 Rev. A
Add Commands to
Favorites
‹ To add commands to the favorites section:
1. Click the Add Command button from the favorites section. A
Command List appears.
Figure 37. Command List Dialog Box
2. Select the command that you want to add to your favorites list.
3. For certain commands, select the location from which you want
to draw or expel fluid using the location drop-down arrow and
clicking the mouse to the location on the microtiter plate image.
This location “tells” the system the reservoir or well from which
you want the system to draw or to which you want to expel fluid.
Figure 38. Well and Reservoir Selection Image
Note: Ensure that the location
you select is compatible with
the volume intended for that
location. The location’s
capacity may vary depending
on the microtiter plate sizes
used.
Reservoir