Luminex 100 IS User Manual, Version 2.1 - Manual (Page 67)

x MAP Technology Software Tour
PN 89-00002-00-061 Rev. A 7 - 7
The following table describes the color coding with relation to types
of message received in the status bar.
Table 1. Status Bar Color Coding
Category Indicates
Command
State Indicates communication with the analyzer
or operations being processed
Green Idle or processing
Yellow Connecting, pausing, or paused
Red Disconnected or locked out
Device Status Indicates the current process of or warning
about the analyzer
Green Running or standby
Yellow Busy, pressurizing, sheath is empty, or warming
up
Red Not ready or disconnected
Device
Activity Indicates the activity the Analyzer is
performing
Note: The device activity has no color code.
Possible
activities
include: • Idling: waiting for a command
• Aspirating: drawing in sample
• Collecting Data: collecting data
• Sanitizing: sanitizing the instrument
• Washing: washing the instrument
• Priming: priming the instrument
• Calibrating: calibrating the instrument
• Canceling: canceling a command
• Backflushing: backflushing the instrument
• Draining: draining the instrument
• Warming Up: warming up the instrument
• Verifying: verifying calibration
• Self Diagnosing: performing self diagnostic
routine
• Soaking: soaking the probe
Laser Status Laser temperature and readiness status
Green Lasers warmed up
Yellow Warmup timer countdown
Red Lasers off