Luminex 100 IS User Manual, Version 2.1 - Manual (Page 104)

100 IS S Users Manual Version 2.1 x MAP Technology
7 - 44 PN 89-00002-00-061 Rev. A
Figure 65. Luminex Multi-Batch Setup Dialog Box
2. If you want to add an existing batch to the multi-batch, click
Add Batch.
3. Select the batch you want to process first in the multi-batch and
click Open. The batch appears beginning in well A1 of the
microtiter plate on the Luminex Multi-Batch Setup dialog box. A
thick red line appears above well A1 and another thick red line
below the last well in the batch. These lines separate this batch
from subsequent batches that you add to the multi-batch.
4. Repeat steps 2 and 3 as often as you need to add all the batches
you want in the multi-batch.