Luminex 100 IS User Manual, Version 2.1 - Manual (Page 124)

100 IS S Users Manual Version 2.1 x MAP Technology
7 - 64 PN 89-00002-00-061 Rev. A
Figure 80. Batch Data Exported Dialog Box
4. Click the OK button.
Database
Management
You can manage the database by backing up and deleting saved data
and files.
The system can store data results for instrument calibrators,
instrument controls, assay calibrators, and assay controls. It records
acquisition and maintenance data in real-time to minimize data loss
in case of system failure. Each batch file records the date and time,
command cancellation (if applicable), and voltages used for
commands performed during the batch.
Back Up the Database
Back up the system database following the schedule set by your
laboratory. Your laboratory may require you to back the system up
weekly or as often as daily or after you complete each batch.
If your laboratory has no schedule for database backups, the system
does inform you when you need to back up the system before data is
lost. You should back up the database according to a periodic
schedule.
‹ To back up the database:
1. Click Tools from the menu bar.
2. Click Database Backup. A dialog box appears.
3. Choose the file name and location at which you want the
database backed up.
4. Click Save. The system backs up the system at this location
under this file name.