Luminex 100 IS User Manual, Version 2.1 - Manual (Page 119)

x MAP Technology Software Tour
PN 89-00002-00-061 Rev. A 7 - 59
There are six function keys on the standards tab:
• F2 - Next Test
• F3 - Previous Test
• F4 - Invalidate Standard
• F5 - Validate Standard
• F6 - Invalidate Control
• F7 - Validate Control
You might need to invalidate a standard if one of the standards to
create your standard curve or high and low limits skews your
expected results.
You can also invalidate a control. However, Luminex does not
recommend invalidating your controls.
Samples Tab
The Samples tab lists tests from your batch and shows the results for
each sample within the batch in tabular form.
Figure 74. Data Reduction Dialog Box: Samples Tab