Luminex 100 IS User Manual, Version 2.1 User Manual
Page 110
100 IS S Users Manual Version 2.1
x
MAP Technology
7 - 50
PN 89-00002-00-061 Rev. A
•
the dilution factor is optional, but if entered, must be a numeric
value
•
any other comma delimited values in the same line will be
ignored (for example, in text x, y, z; the parameter z will be
ignored)
•
if the dilution factor is omitted, a default value of one will be
assumed
An example of a typical patient list file follows below:
LX100IS Patient List
[Accession#, Dilution Factor]
a001,1
a002,2
a003,1
b001,4
b002,0.6
c917,4
cee4gf,1
To add a patient list text file to a batch or multi-batch:
1. Click Open Batch or Open Multi-Batch. An Open Template
dialog box appears.
2. Select a template to which you are appending a patient list and
click Open. A Luminex Batch Setup dialog box appears showing
the template commands in green in the microtiter plate
representation.