Luminex 100 IS User Manual, Version 2.1 - Manual (Page 18)

Luminex 100 IS User Manual Version 2.1 x MAP Technology
2 - 4 PN 89-00002-00-061 Rev. A
This label appears on the back of the XYP instrument.
The XYP instrument has been tested by UL.
This system contains fluidics. In the event of a fluidic leak, turn off
all power to the system and disconnect all power cords. Remember
that the on/off switch is not a disconnect means, the power cord must
be removed from the outlet. Contact Luminex Corporation for further
information.
Waste levels must be manually monitored—do not allow the
waste container to overflow! Empty the waste container each time
the sheath fluid container is filled. The waste container should not be
placed on top of the instrument.
Luminex 100 IS Laser
Classification
The Luminex 100 IS system classifies per FDA 21 CFR 1040.10 as a
Class II laser product consisting of a class I laser component
(Luminex 100 analyzer) and a Class II laser component (barcode
reader).
Luminex 100 Analyzer
Laser
United States and international regulations require the following
warnings to appear on the instrument during operation and
maintenance.
Warning: If biological samples have been tested with the
system, use your standard laboratory safety practices when
handling system waste.