Luminex 100 IS User Manual, Version 2.1 - Manual (Page 61)

PN 89-00002-00-061Rev. A 7 - 1
Software Tour
Luminex 100 IS 2.1
Software
The Luminex 100 IS (IS 2.1) software starts automatically when you
turn on the system, which includes the Luminex 100 analyzer, XYP
instrument, and PC. An animated splash screen (shown below)
appears for about ten seconds.
Figure 28. Luminex 100 IS Software Splash Screen
The system requires you to enter essential information before the
system can open fully.
Getting Started
When using a new system for the first time, the system has no pre-
existing data in its database, so you must enter xMAP calibration and
control targets before the system can proceed to the main menu.
7