Luminex 100 IS User Manual, Version 2.1 - Manual (Page 108)

100 IS S Users Manual Version 2.1 x MAP Technology
7 - 48 PN 89-00002-00-061 Rev. A
Figure 67. New Plate Added
2. Open the batch, as necessary.
3. Load the first plate for the batch.
4. Click Start Plate to begin processing the batch. When the initial
plate is through, the system pauses and displays a message in the
acquisition area prompting you to insert the new microtiter plate.
Figure 68. Insert Next Plate Warning
Dark line separating
adjacent plates within
the same batch
Resume button
Prompt to insert
next plate