Clear-Com Eclipse-Omega - Manual (Page 98)

Eclipse Upgrade Reference Manual
Clear-Com Communication Systems Page 98 of 155 Part Number: 810377Z Rev 6
11.3.2 PD4212E Panel
11.3.2.1 Required
Equipment
1. 512 KBit PROM device – ST M27C512 or equivalent.
2. PROM Programming unit.
3. PROM programming software appropriate for the unit.
4. Appropriate ‘S’ record file for 4212 panel.
11.3.2.2 Upgrade
Steps
1. Ensure that the PROM device to be programmed is empty.
2. Program the PROM device with the appropriate file according to the
instructions for the PROM programmer being used.
3. Confirm that the checksum of the programmed device matches that detailed in
the Eclipse release notes.
4. Remove the existing PROM device from the 4212 panel.
5. Insert the newly programmed PROM device taking care to ensure the correct
polarity of the device.
For PD4212E panels purchased Before 1-July-2006
InstallCD\Panel_Software\ 4000 - 4222+\710703Z – 4222E-4212E Panel Boot
Code\710703Z_PROG_01.S
For PD4212E panels purchased After 1-July-2006
InstallCD\Panel_Software\ 4000 - 4222+\710799Z – 4222E-4212E Panel Boot
Code (Unleaded)\710799Z.S