Clear-Com Eclipse-Omega - Manual (Page 43)

Eclipse Upgrade Reference Manual
Clear-Com Communication Systems Page 43 of 155 Part Number: 810377Z Rev 6
Figure 31 - E-Pico/E-32 DIP Switches in Watchdog Enabled Mode
17. Power cycle the Eclipse-PiCo/E32 so the DIP switch changes come into effect.
18. Proceed to serially download a basic configuration map to the cards using
ECS – This will then allow you to make any further configuration changes via
Ethernet LAN (See ECS programming manual for how to setup a basic
configuration).
(When upgrading from 5.0 to 5.1, the new 5.1 application will reject the 5.0
map; a configuration needs to be downloaded).