Clear-Com Eclipse-Omega - Manual (Page 19)

Eclipse Upgrade Reference Manual
Clear-Com Communication Systems Page 19 of 155 Part Number: 810377Z Rev 6
12. Click on ‘Next’ within the firmware update dialogue and confirm that the IP
address and firmware file selected are correct.
13. Click ‘Next’ within the firmware update wizard dialogue.
14. Wait until the firmware update indicates that it has completed and confirm that
the download was completed successfully (about two minutes).
15. Click ‘Finish’ within the firmware upgrade wizard dialogue.
16. Click on the ‘Matrix Event Log’ tab on the ECS left hand menu bar.
17. Click on the play icon within the matrix event log dialogue.
18. Click on ‘Request Info’ in the right hand menu bar of the ECS matrix event log
dialogue.
19. Select ‘Matrix Overview’ from the list presented in the Request Matrix
Information dialogue and click on “Send”.
20. Confirm that the application version reported is correct.
• Example Message
21. If the upgrade of both configuration cards does not work – repeat the
procedure with only one card in the frame – for each card. When complete
insert both configuration cards into the matrix frame if one has been removed.