Clear-Com Eclipse-Omega - Manual (Page 94)

Eclipse Upgrade Reference Manual
Clear-Com Communication Systems Page 94 of 155 Part Number: 810377Z Rev 6
11.1.4 Notes - V-Series
When a V-series panel upgrade is occurring, no other panels can be upgraded.
When upgrading panels, the panel firmware is uploaded to the rack which then
stores the firmware in flash. However, the V-series firmware is sufficiently large that
there is no room in flash to store it. It has to be retained in the upload buffer. As
such, if another panel type is updated while a V-series update is occurring, the
firmware upload for that other panel will overwrite the V-panel firmware.
When a V-series panel upgrade is occurring, a non-intrusive download from ECS will
break the upgrade. A NID partially resets the configuration for each panel and in
doing so makes the rack "forget" that it is upgrading the panel.
11.1.5 Notes - ICS-52/92
These two panels were originally designed for the Matrix +2. They will functional
normally with later hardware (such as Eclipse) but require a hardware modification
(some resistors and a capacitor) to accept upgrades via ECS. Original build panels
will lack this modification; later build panels have it incorporated.