Figure 88, E-station rear panel layout, Figure 89 – Clear-Com Eclipse-Omega User Manual
Page 105: I-station command shell display on s4 driver, Eclipse upgrade reference manual
Eclipse Upgrade Reference Manual
Clear-Com Communication Systems
Page 105 of 155
Part Number: 810377Z Rev 6
Figure 88 - E-Station Rear Panel Layout
8. The station should enter test mode and you should see the following:
Figure 89 - I-Station Command Shell Display on S4 Driver
9. Select option 2 from the list and press enter on the PC to erase the flash
memory.
10. Once the flash has been erased, Press the F8 key on the PC when the load
dialogue is displayed. (or select ‘Transfer -> Download’ from the S4 main
menu).
11. Navigate to the required ‘S’ Record file and select enter:
InstallCD\Panel_Software\I-Station\710627Z-I-Station-010125 \710627Z.s19
12. The download progress is shown.
13. Disconnect the serial cable from the PC and reconnect the lead from the
Matrix to the panel.
14. Power cycle the I-Station.
Ensure that the panel restarts and displays keys as expected.
RESET BUTTON