Clear-Com Eclipse-Omega - Manual (Page 82)

Eclipse Upgrade Reference Manual
Clear-Com Communication Systems Page 82 of 155 Part Number: 810377Z Rev 6
Figure 78 - IMPACT Screen with Device Chain
8. The full chain should be:
TDI - FPGA (XC2VP20) - FPGA Flash (XCF16P) – TDO
9. We're going to bypass the XC2VP20 (first device) and provide an image for the
second device (the FPGA flash).
10. So, hit the Bypass button for the first device, select the FPGA image for the
XCF16P (flash) router for the second device. The file is:
InstallCD\Omega-Median\710807Z - E-Que FPGA\710807Z-PROG-2.mcs
11. the ‘Assign New Configuration File’ window, which pops up, work your way
along the chain putting the XC2VP20 FPGA’s into ‘Bypass mode’, by clicking
on the ‘Bypass’ button and assigning appropriate configuration files to the
XCF16P Flash devices by browsing to the appropriate configuration file and
clicking on open. The device highlighted in green is the device selected for
assigning a configuration file or bypassing.