Clear-Com Eclipse-Omega - Manual (Page 36)

Eclipse Upgrade Reference Manual
Clear-Com Communication Systems Page 36 of 155 Part Number: 810377Z Rev 6
5. Click on ‘Open’ within the ‘Browse’ dialogue and ensure that the correct file
name is displayed in the firmware update wizard dialogue.
6. Click on ‘Next’ within the firmware update dialogue and confirm that the IP
address and firmware file selected are correct.
7. Click ‘Next’ within the firmware update wizard dialogue.
8. (When upgrading from 5.0 to 5.1, the new 5.1 application will reject the 5.0
map; a configuration needs to be downloaded).
9. Wait until the firmware update indicates that it has completed and confirm that
the download was completed successfully.
10. Click ‘Finish’ within the firmware upgrade wizard dialogue.
11. Click on the ‘Matrix Event Log’ tab on the ECS left hand menu bar.
12. Click on the play icon within the matrix event log dialogue.
13. Click on ‘Request Info’ in the right hand menu bar of the ECS matrix event log
dialogue.
14. Select ‘Matrix Overview’ from the list presented in the Request Matrix
Information dialogue and click on OK.
15. Confirm that the application version reported is correct.
16. Proceed to download a basic configuration map to the cards using ECS – This
will then allow you to make any further configuration changes via Ethernet LAN
(See ECS programming manual for how to setup a basic configuration).