Clear-Com Eclipse-Omega - Manual (Page 77)

Eclipse Upgrade Reference Manual
Clear-Com Communication Systems Page 77 of 155 Part Number: 810377Z Rev 6
9. The TFTP application will only be able to access files which are in the same
directory as it is - the E-QUE firmware file needs to be in the same directory as
the tftpsrv.exe program.
10. Connect the serial cable shown in Figure 27 between the E-QUE card and the
PC and reinsert the E-QUE card into the rack.
Figure 74 - E-QUE Serial Connector
11. Power up the rack if it is not already powered up.
12. Make sure that the E-QUE card and the PC are both connected to the network
in some way, or are connected using a crossover ethernet cable. The LAN
connector on the E-QUE card is the highest RJ45 socket on the back panel.
When the E-QUE card is connected to the PC or to the network, check that the
LAN lights (the yellow and green lights at the bottom of the card) are flashing
occasionally, indicating a network connection.