1 required equipment, 2 upgrade steps, Figure 32 – Clear-Com Eclipse-Omega User Manual
Page 44: Set teraterm serial port, Eclipse upgrade reference manual
Eclipse Upgrade Reference Manual
Clear-Com Communication Systems
Page 44 of 155
Part Number: 810377Z Rev 6
4.7 Eclipse-PiCo / E-32 Configuration Card Application using TeraTerm
4.7.1 Required Equipment
1. PC with serial port or USB port and USB to serial cable.
2. Configured and working TeraTerm installation.
3. Appropriate .4kr file for Eclipse-PiCo / E32 Configuration Card application.
InstallCD\E-Pico E-32\710749Z – Application Code\710749Z.4kr
4. Serial cable for PC to Eclipse-PiCo / E32 interconnection.
• D9 to D9 serial cable for E32.
• .D9 to 3.5mm jack serial cable for Eclipse-PiCo.
4.7.2 Upgrade Steps
1. Install TeraTerm application.
InstallCD \3rd_Party_Software\Teraterm\tterm23.zip
2. Start TeraTerm.
3. Select ‘Serial’ by clicking on the serial radio button and select the COM port to
use.
Figure 32 - Set TeraTerm Serial Port
4. Click on ‘OK’ to confirm the settings.
5. Open the ‘Setup’ menu and select the ‘Serial port…’ entry.