Clear-Com Eclipse-Omega - Manual (Page 23)

Eclipse Upgrade Reference Manual
Clear-Com Communication Systems Page 23 of 155 Part Number: 810377Z Rev 6
• Path: InstallCD\Omega-Median\710621Z - Config App\710621Z.4kr
Figure 9 - S4 Driver File Select
20. Note that the S4 driver only supports the DOS 8.3 naming convention hence
Windows XP file and folder names will appear slightly corrupted in the select
file to download dialogue.
Figure 10 - S4 Driver File Download
21. Confirm that numbers counting up are displayed on the configuration card LED
matrix. Note: The count up display indicates that packets are being received by
the configuration card and do not represent a percentage complete. If the
download fails the CPU display will show “LD Err”. The S4 driver screen will
not indicate a failure and will continue to download. In this case abort the
s4driver download, RESET the CPU card (by removing and reinserting) and
restart the download.
22. Once the download is complete, the CPU card should be left with all lights lit
and the status light blinking.
23. Confirm that the configuration card resets and restarts correctly and that the
OK LED on the front of the card double flashes indicating that there is no
configuration map present in the card.
24. Remove the updated configuration card and set the DIP switches to have
watchdogs enabled (this is the normal operating mode).