Clear-Com Eclipse-Omega - Manual (Page 100)

Eclipse Upgrade Reference Manual
Clear-Com Communication Systems Page 100 of 155 Part Number: 810377Z Rev 6
11.3.4 PD4215E Panel
11.3.4.1 Required
Equipment
1. 512 KBit PROM device – ST M27C512 or equivalent.
2. PROM Programming unit.
3. PROM programming software appropriate for the unit.
4. Appropriate ‘S’ record file for 4215 panel.
11.3.4.2 Upgrade
Steps
1. Ensure that the PROM device to be programmed is empty.
2. Program the PROM device with the appropriate file according to the
instructions for the PROM programmer being used.
3. Confirm that the checksum of the programmed device matches that detailed in
the Eclipse release notes.
4. Remove the existing PROM device from the 4215 panel.
5. Insert the newly programmed PROM device taking care to ensure the correct
polarity of the device.
For PD4215E panels purchased Before 1-July-2006
InstallCD\Panel_Software\ 4000 - 4224 +\ 710705Z - 4224E-4226E-4294E-
4215E Panel Boot Code\710705Z-PROG-01.S
For PD4215E panels purchased After 1-July-2006
InstallCD\Panel_Software\ 4000 - 4224 +\ 710800Z - 4224E-4226E-4294E-
4215E Panel Boot Code (Unleaded)\710800Z-PROG-01.S