B&B Electronics VFG3000 - Manual - Manual (Page 84)

E DITING M ULTI T AGS V LINX F IELDBUS G ATEWAY M ANAGER U SER M ANUAL
P AGE 68
property always acts to maintain an alarm once the alarm is activated, and not to
modify the point at which the activation occurs.
• The remainder of the properties are as described for the Alarms tab of flag tags.
T HE T RIGGERS T AB
The Triggers tab of an integer variable or formula contains the following properties...
• The Trigger Mode property is as described for the Alarm tabs.
• The Delay property is as described for a flag tag’s Alarms tab.
• The Action property is used to indicate what action should be performed when
the trigger is activated. Refer to the Writing Actions section for a description of
the syntax used to define the various actions that Fieldbus Gateway Manager
supports.
E
DITING
M
ULTI
T
AGS
You will recall that multi tags represent a 32-bit signed value, but are used to select between
one of a number of text strings. The following sections describe the various tabs that are
displayed on the right-hand side of the Data Tags window when editing a multi tag.