7 line diagnostics set command, 8 line diagnostics get command, Figure 246 1day performance command example – ZyXEL Communications IES-612-51A User Manual

Page 363: Figure 247 line diagnostics set command example

Chapter 52 ADSL Commands

IES-612-51A User’s Guide

363

An example is shown next.

See

Table 95 on page 362

for details about these counters.

52.2.7 Line Diagnostics Set Command

Syntax:

ras> adsl linediag setld

This command has the IES-612-51A perform line diagnostics on the specified port. The DSL
port must be set to ADSL2 or ADSL2+ operational mode and have a connection. It takes about
one minute for the line diagnostics to finish.

The following example performs line diagnostics on DSL port 1. The screen displays a
message confirming upon which DSL port line diagnostics will be performed.

52.2.8 Line Diagnostics Get Command

Syntax:

ras> adsl linediag getld

Use this command to display the line diagnostics results after using the line diagnostics set
command on a DSL port. Use the line diagnostics results to analyze problems with the
physical DSL line.

Figure 246 1Day Performance Command Example

ras> statistics adsl 1dayperf 1

Port 1 current 1 day elapsed time:81985 sec (Link Down)

Current 1 Day Perf ATUC ATUR

lofs 0 0

loss 0 0

lols 0 -

lprs - 0

es 0 0

init 0 -

ses 0 0

uas 0 0

Port 1 previous 1 day elapsed time:0 sec

Previous 1 Day Perf ATUC ATUR