ZyXEL Communications IES-612-51A - Manual (Page 225)

IES-612-51A User’s Guide
225
C
H A P T E R
3 4
Access Control
This chapter describes how to configure access control.
34.1 Access Control Screen
Use this screen to configure SNMP and enable/disable remote service access.
To open this screen, click Advanced Application, Access Control.
Figure 113 Access Control
34.2 Access Control Overview
A console port or Telnet session can coexist with one FTP session, a web configurator session
and/or limitless SNMP access control sessions.
34.3 SNMP
Simple Network Management Protocol is a protocol used for exchanging management
information between network devices. SNMP is a member of TCP/IP protocol suite. A
manager station can manage and monitor the IES-612-51A through the network via SNMP
version one (SNMPv1) and/or SNMP version 2c. The next figure illustrates an SNMP
management operation. SNMP is only available if TCP/IP is configured.
Table 73 Access Control Summary
CONSOLE
PORT
TELNET FTP WEB SNMP
Number of sessions allowed 1 5 1 No limit No limit