ZyXEL Communications IES-612-51A - Manual (Page 110)

Chapter 13 xDSL Port Setup
IES-612-51A User’s Guide
110
Copy Port
Paste Do the following to copy settings from one DSL port to another DSL port or
ports.
1. Select the number of the DSL port from which you want to copy settings.
2. Select the settings that you want to copy.
3. Click Paste and the following screen appears.
4. Select to which ports you want to copy the settings. Use All to select every
port. Use None to clear all of the check boxes.
5. Click Apply to paste the settings.
Figure 47 Select Ports
Active Select this check box to copy this port’s active setting. This is configured in the
xDSL Port Setting screen (see
Section 13.7.1 on page 111 ).
Customer Info Select this check box to copy this port’s subscriber information. This is
configured in the xDSL Port Setting screen (see
Section 13.7.1 on page 111 ).
Customer Tel Select this check box to copy this port’s subscriber’s telephone number. This is
configured in the xDSL Port Setting screen (see
Section 13.7.1 on page 111 ).
2+ Features Select this check box to copy this port’s ADSL2+ feature settings. These are
configured in the xDSL Port Setting screen (see
Section 13.7.1 on page 111 ).
Profile&Mode Select this check box to copy this port’s port profile settings and ADSL
operational mode. The port profile settings are configured in the xDSL Port
Profile Setup screens (see
Chapter 14 on page 125 ). The ADSL operational
mode is configured in the xDSL Port Setting screen (see Section 13.7.1 on
page 111 ).
IGMP Filter Select this check box to copy this port’s IGMP filter settings. These are
configured in the IGMP Filter Profile screen (see
Section 14.8 on page 135 ).
Security Select this check box to copy this port’s security settings. This is configured in
the Port Security screen (see
Chapter 24 on page 185 ).
Frame Type Select this check box to copy this port’s allowed frame type. This is configured
in the Static VLAN Setting screen (see
Chapter 22 on page 175 ).
Virtual Channels Select this check box to copy this port’s virtual channel settings. These are
configured in the VC Setup screen (see
Section 13.9 on page 116 ).
Alarm Profile Select this check box to copy this port’s alarm profile. This is configured in the
Alarm Profile Setup screen (see
Section 14.6 on page 133 ).
PVID&Priority Select this check box to copy this port’s PVID and priority settings. These are
configured in the VLAN Port Setting screen (see
Chapter 22 on page 175 ).
Packet Filter Select this check box to copy this port’s packet filter settings. These are
configured in the Packet Filtering screen (see
Chapter 20 on page 171 ).
Paste See Copy Port.
Table 19 xDSL Port Setup (continued)
LABEL DESCRIPTION