ZyXEL Communications IES-612-51A - Manual (Page 318)

Chapter 47 IGMP Commands
IES-612-51A User’s Guide
318
47.5.1 IGMP Bandwidth Port Disable Command
Syntax:
ras> switch igmpsnoop bandwidth port disable
where
This command deactivates multicast bandwidth settings of the specified port.
47.5.2 IGMP Bandwidth Port Enable Command
Syntax:
ras> switch igmpsnoop bandwidth port enable
where
This command activates multicast bandwidth setting on the specified port.
47.5.3 IGMP Bandwidth Port Set Command
Syntax:
ras> switch igmpsnoop bandwidth port set
where
This command sets the bandwidth allowed for multicast traffic on the specified port(s). It does
not automatically enable it, however.
47.5.4 IGMP Bandwidth Port Show Command
Syntax:
ras> switch igmpsnoop bandwidth port show
= You can specify a single DSL port <1>, all DSL ports <*>
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
= You can specify a single DSL port <1>, all DSL ports <*>
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
= You can specify a single DSL port <1>, all DSL ports <*>
or a list of DSL ports <1,3,5>. You can also include a range
of ports <1,5,6~10>.
= 1..100000, in units of kbps